Tutorial }- How to Unbrick Zenfone 5 and Zenfone 6
How To Unbrick Zenfone 5 Official Firmware Download
How To Unbrick Zenfone 6 Official Firmware Download
Hi
Mostly this phone can't on , Cases hang Mode . This case Use Power Button 3 Min
/ All Button Together 3 Min. So before try make a sure its not Hang Mode !
How to Unbrick Asus Zenfone. :
DWYOR (Do it With Your Own Risks)
Resources:
Intel USB Driver (Download HERE)
ASUS USB Driver (Download HERE)
iSocUSB-Driver-Setup-1.0.4.exe (Download HERE)
xfstk-downloader-setup-1.5.1.exe (Download HERE)
ADB Fastboot Tool (Download HERE)
FW DnX, IFWI, OS DnX, OS Image files (Download For Zenfone
5 / Download
for Zenfone 6)
Update Splashscreen.bat (Download HERE)
ASUS Zenfone5/6 Firmware/ROM (Download HERE)
All The Link Blocked By Forum So Use This Link For Download Or Direct Download
Instructions Unbrick Asus Zenfone 5 & 6:
Download all Resources above and place it to one folder,
then Install Intel USB Driver and ASUS Zenfone USB Driver.
The first step is to install iSocUSB-Driver-Setup-1.0.4.exe,
when your phone is on USB pattern appears when connected to the computer should
be two new devices, both at Intel Soc classification: CloverviewPlus
Device and Intel Soc USB Driver.
unbrick-zenfone-device manager
The second step is to install xfstk-downloader-setup-1.5.1.exe andswitch
to the CLVP A0/B0/B1 Tab, and Make sure Device status column which shows
the Scanning: CLOVERVIEWPLUS TARGETS DETECTED: 1, if the final surface is
displayed as 0, check again Device Manager and make sure Zenfone is detected.
xfstk-downloader zenfone
Detected Device: CLOVERVIEWPLUS TARGETS DETECTED: 1
The next thing is very simple, sequentially select FW DnX,
IFWI, OS DnX, OS Image files that you have downloaded earlier.and Click Begin
Download, then USB pattern on the phone will have a progress bar display (red)
Unbrick Zenfone xSTFK Downloader Progress
Upon completion of the phone will automatically reboot
, if the boot screen becomes the pattern of Intel inside,
there are two ways:
Enter Recovery and Flash ROM via ADB
Via Fastboot flash the splashscreen
* Phone into fastboot mode and connected to your computer,
click on the execution
Update_SplashScreen.bat
If the above steps are completed, the phone still will not
turn on, or in the recovery Flash factory ROM also has problems (occurring
failed to mount / cache errors ), here there is a last resort:
Download The Reset.bat (Download HERE)
Phone into fastboot modeand connected to your
computer, click on the execution Reset.batre-initialize the phone.
Go to Fastboot, Flash Recovery (Tutorial HERE) and Flash ROM with the same build number with the
recovery
Original Source : [ZenFone - Rescue guide]
Try On Your Own Risks !!!
No comments:
Post a Comment